settings are not being saved from last version
-
- Beiträge: 2
- Registriert: Mi 13. Nov 2019, 12:32
settings are not being saved from last version
settings will not save even after resetting to factory default after putting the most current version on PC from Version 1.6 is there is any way u guys can fix this
Version Number is 1.7.1404 of your software
I am running Windows 10 Home, Version 1909 Update (19H2)
Version Number is 1.7.1404 of your software
I am running Windows 10 Home, Version 1909 Update (19H2)
- Martin (O&O)
- Beiträge: 884
- Registriert: Mo 27. Jun 2011, 13:07
- Kontaktdaten:
Re: settings are not being saved from last version
Hello,
Thank you for bringing this problem to our attention. I have forwarded your Information to our development department. Our developers will analyze and fix this if possible.
We regret any inconvenience this may have caused you.
Martin (O&O)
Thank you for bringing this problem to our attention. I have forwarded your Information to our development department. Our developers will analyze and fix this if possible.
We regret any inconvenience this may have caused you.
Martin (O&O)
Settings are not being saved from last version
Using version 1.7.1405 and loading a config-file (OOSU10.exe oosu10.cfg /quiet) the settings are still not saved. Tested on different computers with Windows 10 Pro and Home, 64 Bit, Version 1909.
The only way to get the settings saved is:
- Starting OOSU10.exe manually
- Loading recommended settings
- Changing some settings manually (as required)
- Closing OOSU10.exe
Loading the config-file manually will also not save the settings.
When loading recommended values then I am asked, if I want to generate a restore point.
When loading config-file, there is no question for system restore point. Settings are shown, but not saved, when closing the program.
Basically a good program, but I need the automatic configuration from config-file.
Many thanks for your efforts.
The only way to get the settings saved is:
- Starting OOSU10.exe manually
- Loading recommended settings
- Changing some settings manually (as required)
- Closing OOSU10.exe
Loading the config-file manually will also not save the settings.
When loading recommended values then I am asked, if I want to generate a restore point.
When loading config-file, there is no question for system restore point. Settings are shown, but not saved, when closing the program.
Basically a good program, but I need the automatic configuration from config-file.
Many thanks for your efforts.
Re: settings are not being saved from last version
Same Problem here, with Windows 10 Enterprise x64 Version 1909.
The new O&O ShutUP Version 1.7.1405 works only manually, with script and "/quiet" switch
no Settings will be made.
If there is a chance to fix this bug we would be very grateful
Many thanks for your Work!
Andreas
The new O&O ShutUP Version 1.7.1405 works only manually, with script and "/quiet" switch
no Settings will be made.
If there is a chance to fix this bug we would be very grateful
![Lächeln :)](./images/smilies/icon_e_smile.gif)
Many thanks for your Work!
Andreas
Re: settings are not being saved from last version
Hello,
Today I also encountered this problem with version 1.7.1405.
Is a release date known?
--
Martin
Today I also encountered this problem with version 1.7.1405.
Is a release date known?
--
Martin
Martin (O&O) hat geschrieben: ↑Fr 6. Dez 2019, 11:52Hello,
Thank you for bringing this problem to our attention. I have forwarded your Information to our development department. Our developers will analyze and fix this if possible.
We regret any inconvenience this may have caused you.
Martin (O&O)
-
- Beiträge: 1
- Registriert: Fr 3. Jan 2020, 08:06
Re: settings are not being saved from last version
Hi there,
any updates on this? I also encountered this problem…
br
Alexander
any updates on this? I also encountered this problem…
br
Alexander
Re: settings are not being saved from last version
Hi there,
any updates on this? I also encountered this problem…
Thanks
Matthias
any updates on this? I also encountered this problem…
Thanks
Matthias
- Martin (O&O)
- Beiträge: 884
- Registriert: Mo 27. Jun 2011, 13:07
- Kontaktdaten:
Re: settings are not being saved from last version
Hello,
our developers are still working on it.
Martin (O&O)
our developers are still working on it.
Martin (O&O)
Re: settings are not being saved from last version
Same issue here on many machines.
May we download and use the older version 1.6 from elsewhere?
Many thanks for your work!
Stefan
May we download and use the older version 1.6 from elsewhere?
Many thanks for your work!
Stefan
settings are not being saved from last version
With new Version 1.7.1406 we are one step ahead.
Loading a config-file manually will save the settings.
But running from script (OOSU10.exe oosu10.cfg /quiet) the settings are still not saved. Tested on different computers with Windows 10 Pro and Home, 64 Bit, Version 1909.
I really like this program, but running on each computer manually is just too much.
Regards
Reinhard
Loading a config-file manually will save the settings.
But running from script (OOSU10.exe oosu10.cfg /quiet) the settings are still not saved. Tested on different computers with Windows 10 Pro and Home, 64 Bit, Version 1909.
I really like this program, but running on each computer manually is just too much.
Regards
Reinhard
-
- Beiträge: 1
- Registriert: Do 6. Feb 2020, 09:51
Re: settings are not being saved from last version
Hi there,
same problem here: works when loading config manually but not in "script-mode".
I´m using v1.7.1406 on Windows 10 Pro 1909
I hope this can be fixed soon because it is a great Tool (and I really need it).
Many thanks & best regards
same problem here: works when loading config manually but not in "script-mode".
I´m using v1.7.1406 on Windows 10 Pro 1909
I hope this can be fixed soon because it is a great Tool (and I really need it).
Many thanks & best regards
settings are not being saved from last version
Spent some time testing OOSU10 Version 1.7.1406 and found out:
Settings are not even loaded, wenn running OOSU10 in a script.
Was running OOSU10 without the /quiet switch (OOSU10.exe oosu10.cfg).
OOSU10 starts and says "No changes made" (or something similar).
Since OOSU10 stays opened, I could load the same configuration file manually.
In this case the result was as expected: "8 changes made".
Hope this helps in solving the problem.
Best regards
Reinhard
Settings are not even loaded, wenn running OOSU10 in a script.
Was running OOSU10 without the /quiet switch (OOSU10.exe oosu10.cfg).
OOSU10 starts and says "No changes made" (or something similar).
Since OOSU10 stays opened, I could load the same configuration file manually.
In this case the result was as expected: "8 changes made".
Hope this helps in solving the problem.
Best regards
Reinhard
Re: settings are not being saved from last version
The same problem here with 1.7.1406 under Windows 10 Pro 1909
OOSU10.EXE oosu10.cfg /quiet
Hope the changes won't take 2 months again![Traurig :-(](./images/smilies/icon_e_sad.gif)
---
supertux
OOSU10.EXE oosu10.cfg /quiet
Hope the changes won't take 2 months again
![Traurig :-(](./images/smilies/icon_e_sad.gif)
---
supertux
Re: settings are not being saved from last version
Thank you for the very quick implementation of the import error from the console.
Re: settings are not being saved from last version
The settings that I set on my computer are not being saved, even though I click "save". The next day, when I turn on the computer, the settings are not retained.
Re: settings are not being saved from last version
Same here. Sticks for an hour or less for me. Super annoyingelwishone hat geschrieben: ↑Fr 20. Nov 2020, 20:16The settings that I set on my computer are not being saved, even though I click "save". The next day, when I turn on the computer, the settings are not retained.gbwhatsapp apk
-
- Beiträge: 1
- Registriert: Mo 1. Feb 2021, 08:16
Re: settings are not being saved from last version
I am using the latest version of O&O ShutUp. I noticed that after starting I did not get any information about changes, although changes were made in the Windows settingsSettings are not even loaded, wenn running OOSU10 in a script. proessays
Re: settings are not being saved from last version
Hallo,
after windowsupdate my "telemetrie deactivate" settings are some times set to OFF. I changed it and after shut down my computer the settings are gone again. Any Ideas ?
- Win 10 64 bit 20H2 (all updates)
- newest vers. of shutUp10
after windowsupdate my "telemetrie deactivate" settings are some times set to OFF. I changed it and after shut down my computer the settings are gone again. Any Ideas ?
- Win 10 64 bit 20H2 (all updates)
- newest vers. of shutUp10
Re: settings are not being saved from last version
Yes - same here... Its the service "dmwappushservice" (WAP-Push...) which set "itself" from deactivated back to manual start after some time.
Did not yet found out why this happens.
Re: settings are not being saved from last version
Same here... also Win 10 64-bit 20H2 with all patches and newest OOShutup .
I think its not really a problem in OOShutup
I'am not quite shure, but i think this behavior started after the second last Patch-Day.
If I deactivate 'Telemetriedaten senden' in OOShutup and look after reboot again in OOShutup, its all fine.
But after a few windows updates, even only defender signatues, it switch back to activated.
I guess its a new behavior from windows update... ;-(
I think its not really a problem in OOShutup
I'am not quite shure, but i think this behavior started after the second last Patch-Day.
If I deactivate 'Telemetriedaten senden' in OOShutup and look after reboot again in OOShutup, its all fine.
But after a few windows updates, even only defender signatues, it switch back to activated.
I guess its a new behavior from windows update... ;-(
Re: settings are not being saved from last version
Hallo!after windowsupdate my "telemetrie deactivate" settings are some times set to OFF. I changed it and after shut down my computer the settings are gone again.
Genanntes Problem tritt auch auf meinen Geräten seit dem letzten Windows-Update (KB4601319) auf:
Die Einstellung unter "Sicherheit > Telemetrie deaktivieren" bleibt nicht aktiv bzw. aktiviert. Die vorgenommene Einstellung wird nach kurzer Zeit wieder verworfen bzw. rückgängig gemacht.
Nach setzen der Einstellung "Telemetrie deaktivieren" und erforderlichem Neustart, zwecks Übernahme der Einstellung, bleibt diese vorerst auch aktiv. Nach einem gewissen Zeitraum (schätzungsweise in der ersten halben Stunde nach dem Neustart) erfolgt aber die automatische Rücksetzung besagter Einstellung.
Ich nutze ShutUp10 auf 3 PC´s und die Problematik tritt überall auf. Windows-Version auf allen Geräten: Win10 / Version 20H2 / Betriebssystembuild 19042.804.
Sowohl ShutUp10-Version 1.8.1415 wie auch 1.8.1417 wurden getestet.
Danke im Voraus wenn sich jemand der Problematik annehmen würde.
Freundliche Grüße
Chris71
Re: settings are not being saved from last version
Hallo,
In meinem Fall spielt die Zeit nach dem Neustart / Start keine Rolle. Es reicht aus, den Computer in den Energiesparmodus zu versetzen und ihn in einem Moment wieder funktionsfähig zu machen. Der Wert "Telemetrie deaktivieren" ändert sich und wird nach dem Neustart des Systems nicht wieder angezeigt.
Entschuldigung für die Sprache, ich benutze einen Übersetzer.
Grüße.
Win 10 Home 20H2 19042.804
In meinem Fall spielt die Zeit nach dem Neustart / Start keine Rolle. Es reicht aus, den Computer in den Energiesparmodus zu versetzen und ihn in einem Moment wieder funktionsfähig zu machen. Der Wert "Telemetrie deaktivieren" ändert sich und wird nach dem Neustart des Systems nicht wieder angezeigt.
Entschuldigung für die Sprache, ich benutze einen Übersetzer.
Grüße.
Win 10 Home 20H2 19042.804
Re: settings are not being saved from last version
i observed the behavior a litte further.
It seems that telemetrie stays deactivated till the next reboot. (didn't test sleep mode)
Is there a way OOShutUp can prevent it?
It seems that telemetrie stays deactivated till the next reboot. (didn't test sleep mode)
Is there a way OOShutUp can prevent it?
- Brigitte (O&O)
- Beiträge: 1053
- Registriert: Mo 27. Jun 2011, 13:06
Re: settings are not being saved from last version
Hallo,
O&O ShutUp 10 kann leider nicht verhindern, dass das Windows-Betriebssystem die Telemetrie Konfiguration wieder ändert.
O&O ShutUp 10 kann leider nicht verhindern, dass das Windows-Betriebssystem die Telemetrie Konfiguration wieder ändert.
Brigitte (O&O)
Re: settings are not being saved from last version
Re: settings are not being saved from last version
Update the version to the latest and then try. I had the same problem but once I updated to the latest, All went fine. Wish you luck sir. Also, you can try restarting you PC, as sometimes Windows may have problem, and clear cache as well.
-
- Beiträge: 1
- Registriert: Sa 3. Apr 2021, 15:48
- Kontaktdaten:
Re: settings are not being saved from last version
Bro try to install and uninstall the current version, you should be able to change the settings.GBWhatsApp APKdronk012292 hat geschrieben: ↑Do 5. Dez 2019, 17:54settings will not save even after resetting to factory default after putting the most current version on PC from Version 1.6 is there is any way u guys can fix this
Version Number is 1.7.1404 of your software
I am running Windows 10 Home, Version 1909 Update (19H2)
-
- Beiträge: 1
- Registriert: Sa 3. Apr 2021, 17:40
Re: settings are not being saved from last version
I think there is a problem with its version, try to update it and reinstall hawa whatsapp. Hope It will start working.
Re: settings are not being saved from last version
it has been fixed in its latest version 1.8.1423. i'm using it and facing no issues now.dronk012292 hat geschrieben: ↑Do 5. Dez 2019, 17:54settings will not save even after resetting to factory default after putting the most current version on PC from Version 1.6 is there is any way u guys can fix this.
Version Number is 1.7.1404 of your software
I am running Windows 10 Home, Version 1909 Update (19H2)